Mac Tool Box Drawer Slides

Mac Tool Box Drawer Slides - I do not have a key for this box but it should be pretty easy to get one. You can get the slides there, lifetime war. The box is probably 20 years old and the tag with the p/n is gone so i don't know if mac will be able to help me much, if not at all. Yes, i know, i should be able to specify replacements from that, but i don't wanna end up ordering piles of parts, only to find i fawked up. My craftsman pro has same latch setup but is way better built. Here is the new slide. They are good to deal with. Input this number into searspartsdirect.com to get a price on slides. They had to warrenty replace it due to paint flaking on the front bottom edge. And here is the finished product.

I do not have a key for this box but it should be pretty easy to get one. You can get the slides there, lifetime war. Here are the new slides the old slides were welded to the drawer box sides, so i had to cut out the spot welds. This box was less then a year old, 10 months to be exact. The larger lower drawers have ball bearing slides and the 9 small upper ones do not. Without them even knowing i used to be a rep. Time to go to sears and see what the new lower drawer slides look like and see how they mount.hopefully there is a close match otherwise, i am sol without some modification and adaptation of new slides i am thinking about seeing how the upper drawer slides look and work and if they are all the same slides, for all 7 drawers New the box is $8500 bucks. I bought this box a few years ago and it's been sitting with no tools in it since. Btw, most snappy dealers will give you what you paid for the old box on a trade to a new krl.

12Pcs Tool Box Drawer Slide Retaining Keeper Clips 1 5/8" Fit for MAC

So i figure i can sell it. Btw, most snappy dealers will give you what you paid for the old box on a trade to a new krl. The rest of the box has been all refurbished, new ball bearing slide for the bottom drawer is on its way. This box was less then a year old, 10 months to.

Mac Tool Box Drawer Slide Clips Drawerslides

They are good to deal with. The larger lower drawers have ball bearing slides and the 9 small upper ones do not. If you have the bux the krl's are the way to go. I do not have a key for this box but it should be pretty easy to get one. It was a guy who was a mechanic.

Mac tool box drawer slides mb4150 amelachecks

The box is probably 20 years old and the tag with the p/n is gone so i don't know if mac will be able to help me much, if not at all. So i figure i can sell it. Time to go to sears and see what the new lower drawer slides look like and see how they mount.hopefully there.

Mac tool box drawer slides mb4150 silentlasopa

The box linked looks cheaply made based on the side view of the drawer latches. Here are the new slides the old slides were welded to the drawer box sides, so i had to cut out the spot welds. Only tool required is a small prybar or flathead screwdriver to pop the old slide out. So i figure i can.

Mac Tool Box Drawer Slide Clips Drawerslides

Time to go to sears and see what the new lower drawer slides look like and see how they mount.hopefully there is a close match otherwise, i am sol without some modification and adaptation of new slides i am thinking about seeing how the upper drawer slides look and work and if they are all the same slides, for all.

Mac Tool Box Drawer Slide Clips Drawerslides

Btw, most snappy dealers will give you what you paid for the old box on a trade to a new krl. New the box is $8500 bucks. I am an ex mac dealer and have gotten stuff war. They are good to deal with. The rest of the box has been all refurbished, new ball bearing slide for the bottom.

Accuride mac tool box slides gesertales

Yes, i know, i should be able to specify replacements from that, but i don't wanna end up ordering piles of parts, only to find i fawked up. Only tool required is a small prybar or flathead screwdriver to pop the old slide out. This box was less then a year old, 10 months to be exact. The box is.

Mac Tool Box Drawer Slide Stop

The larger lower drawers have ball bearing slides and the 9 small upper ones do not. I bought this box a few years ago and it's been sitting with no tools in it since. And here is the finished product. So i figure i can sell it. My craftsman pro has same latch setup but is way better built.

12 Pcs Tool Box Drawer Slide Retaining Keeper Clips, Snap on Tool Box

So i figure i can sell it. The larger lower drawers have ball bearing slides and the 9 small upper ones do not. The box linked looks cheaply made based on the side view of the drawer latches. It was a guy who was a mechanic at a car dealership, the cleaning crew would water the bays and would hit.

Mac Tools 6 Drawer Slide Top Tool Box Tour UPDATED! YouTube

Yes, i know, i should be able to specify replacements from that, but i don't wanna end up ordering piles of parts, only to find i fawked up. Here are the new slides the old slides were welded to the drawer box sides, so i had to cut out the spot welds. Input this number into searspartsdirect.com to get a.

Now They Had A Box They Had To Do Something With.

So i figure i can sell it. Made the box sides much more rigid. I bought this box a few years ago and it's been sitting with no tools in it since. The larger lower drawers have ball bearing slides and the 9 small upper ones do not.

They Had To Warrenty Replace It Due To Paint Flaking On The Front Bottom Edge.

I am an ex mac dealer and have gotten stuff war. The box linked looks cheaply made based on the side view of the drawer latches. Here are the new slides the old slides were welded to the drawer box sides, so i had to cut out the spot welds. The box is probably 20 years old and the tag with the p/n is gone so i don't know if mac will be able to help me much, if not at all.

Btw, Most Snappy Dealers Will Give You What You Paid For The Old Box On A Trade To A New Krl.

Input this number into searspartsdirect.com to get a price on slides. I have an older mac toolbox with accuride drawer slides. I do not have a key for this box but it should be pretty easy to get one. And here is the finished product.

This Box Was Less Then A Year Old, 10 Months To Be Exact.

Here is the new slide. The box sold for over $1800 new. Without them even knowing i used to be a rep. It was a guy who was a mechanic at a car dealership, the cleaning crew would water the bays and would hit the box just a bit with.